SUITABLE FOR ALL TYPES OF GROUNDS
Your Composite PREMIUM® fencing is suitable for all types of grounds. You will be able to customize your fence and make it unique with a wide range of accessories!
Fencing board characteristics
- Brushed wood composite boards, available in 3 colours (Dark brown, anthracite grey, light grey) and dual finish (one smooth side, one embossed side).
- Carbon composite wood boards, unbrushed, dual finish (one side smooth, one side embossed -the surface effect will fade over time-).
- Dimensions (mm): 21 x 180 x 1483.
Try associating wood composite with glass, aluminium, or perspex… and create a really fashionable fence!
FEATURES AND STRENGHTS OF OUR FENCES
Suitable for all types of ground (concrete sealing or installation on post support):
- Needs little maintenance, does not fade to grey like solid wood.
- Simple cleaning is required.
It is compulsory to fit a top rail, a halfway support profile and a base rail for each panel. The halfway support profile must be placed in the centre of the panel. (Use a H/B rail and tear off the tab.) The halfway support profile is unnecessary for panels under 95 cm in height.
FENCING ACCESSORIES
4 COLOURS are available for posts and accessories:
- Brown (RAL 8025 matt).
- Anthracite grey (RAL 7016 matt).
- Light grey (RAL 9006 matt metal).
- New Black (RAL 9005 Matt).
Cap
- Coated aluminium cap.
- Dimensions (mm): 50 x 65.
Finishing profile
- Coated aluminium profile.
- To be placed horizontally, at the top, at the bottom and between the fencing boards in the centre of the panel.
- Dimensions (mm): 44 x 34 x 1450.
Multi-position post
- Coated aluminium post.
- This post is positioned at the start, middle and end of the fence. The removable tab turns it into a corner post.
- The post can be placed on a post support up to 1.80 m, or sealed in concrete up to 1.80 m also.
- It can be cut to tailor it to all desired dimensions.
- Dimensions (mm): 50 x 65 x 2315.
Double shell post support
- Coated aluminium.
- Gives the post optimum support.
- Dimensions (mm) 120 x 130 x 80.
Multi-position post 0,95 m
- Powder-coated aluminium post.
- It is positioned at the start, middle and end of the fencing.
- The removable tab converts it into a corner post.
- Is compatible with the low wall post support.
- Can be cut to fit any size.
- Dimensions in mm: 50 x 65 x 950.
Low wall post support
- Wall mounted post support kit
- In powder-coated aluminium.
- Allows discreet mounting on low wall of post 0.95 m (only).
- Supplied with screws and nut covers.
- Dimensions in mm : 120 x 52 x 10
Wall start post
- In powder-coated aluminium.
- Allows the fencing to be started along a wall.
- Dimensions in mm: 70 x 35 x 1884.
Wall start cap
- In powder-coated aluminium
- For finishing the wall start post.
- Dimensions in mm: 70 x 35
Adjusting spacer
Allows you to adjust the level of the boards on a non-straight floor and simplifies installation.
- Dimension in mm: 30x45x15
Set of connectors
Optional, connectors simplify the vertical positioning and spacing between posts and facilitate their installation.
Design panels
These give a sparkle to your fence and make it truly unique!
All design panels are inserted between two wood composite boards. And, among the latter, only acrylic and frosted glass design panels can be positioned in the latter position at the very top of the premium fencing, using a top rail and a flexible rubber seal.
XL DESIGN PANELS (HEIGHT TWO FENCE BOARDS)
- Frosted glass panels
- Dimensions en mm : 370 x 1483.
- Cubic panels : in alumimium
- Dimensions (mm): 370 x 1483.
- Colours: light grey and anthracite grey.
Triptyque panels: in aluminium
- Dimensions (mm): 370 x 1483.
- Colours: light grey and anthracite grey.
- Design panel: in aluminium
- Dimensions (mm): 370 x 1483.
- Colours: light grey and anthracite grey.
- Transparent acrylic design panel (perspex)
- Dimensions (mm): 370 x 1483.
Design panels
- Galvanized steel.
- To be inserted between two posts.
- To be filled with 125 to 150 kg of 15-25 mm gravel (not supplied).
- Dimensions in mm: 800 x 1800 x 40.
Fence post led
The LED power supply can power up to 3 x 2.00 m LED tapes.
- Design accessory for decking lighting, it can be recut every 5 cm.
- Completely watertight to the IP68 (LED tape) and IP67 (power supply) standards.
- Must be controlled with a LED power supply to which up to 3 LEDS can be connected.
- Dimensions (mm): 24x24x1835 (for the distributor strip).